diagnostic car tool position and unplug the OBD-II diagnostic tool.

The way to Plan the Keyless Remote to get a 2007 Chevrolet Uplander 1Plug an OBD-II diagnostic tool in for the OBD-II diagnostic port under the driver's side of your dashboard, towards the left of the steering column.

2Insert the ignition important in the Uplander's ignition and turn it towards the "Run" position, but do not begin the vehicle.3Follow the directions on the OBD-II scanner to access the "Key Fob Programming" application auto diagnostic software. This application varies, depending on the scanner utilised, but is commonly situated in the "Body Handle Module" functions area.

4Press and hold the "Lock" diagnostic car tool; and "Unlock" buttons on the important fob until the ODB-II diagnostic tool alerts you that programming is complete, this typically takes five to ten seconds.5Repeat Step 4 to system as lots of as four transmitters to your Uplander.6Turn the ignition towards the "Off" position and unplug the OBD-II diagnostic tool.