The way to Reset For Fault in ABS on a Chrysler Town & Country 1Turn the Town and Country's engine off, but leave the key in the "On" position. In this position, the cluster lights should be on.2Plug your diagnostic scan tool into the scan port beneath the steering column.
After a few seconds, you'll see a notice on the tool's display screen that lets you know it is connected to the Town and Country's computer.3Push the "Reset" or "Clear" auto diagnostic; button on your scan tool. Wait for the display screen to show a confirmation, and then unplug it from the port automotive diagnostic tool. Turn the key off and remove it, and then reinsert it. Make sure the "ABS" fault light is turned off.4Turn off the Town and Country's engine and open the hood if you don't have a diagnostic scan tool.
Lift the cover from the van's battery. Turn the nut on the black (negative) battery cable with pliers or a wrench to loosen it. Grasp the base of the cable and pull it away from the battery to unhook it. Wait 10 minutes, and then reconnect the battery. This resets the computer system, including the "ABS" fault code.
Related articles:
没有评论:
发表评论