The way to Examine the Trouble Codes on a Ford Contour 1Locate the DLC on the Ford Contour. The place may possibly differ slightly depending on the year, but most generally it is going to be under the driver's side dashboard near the steering wheel. It really is trapezoid shaped and you can refer towards the plug on the finish from the code reader considering the fact that that has to plug into it.2Plug the code reader in to the DLC and turn the ignition key for the "key-on/engine-off" position.
That is two clicks clockwise to ensure that all powered choices are operable without the engine running.3Follow the onscreen menu on the code reader. The battery from the Contour will energy up the code reader the moment plugged in. You will not must turn on a power button. There may be a handful of solutions on the onscreen menu based on what kind you are using, but most will have an "enter" button and an up and down scrolling button(s).
4Scroll the down arrow until the cursor on the screen of your code reader displays "read codes." Press enter. Following the command is sent Auto tools, (it might take a few seconds) it may display the code(s) or tell you how lots of were located or pending. Follow the onscreen guidelines on the code reader and pick the enter button to read all of the trouble codes like pending codes.5Write the codes down on a piece of paper and refer towards the chart to diagnose the problem. Not all difficulty codes read by the code reader and even an incredibly costly computerized scan tool will reveal the problem with the vehicle. There may well be circumstances where investigating the trouble code may possibly be vital Car Diagnostic Tools, or particular repairs may perhaps be needed so as to proceed.
Related articles:
没有评论:
发表评论